MK3 Alarm System
MK3 ALARM SYSTEM
The Mk3 alarm panel can monitor up to 12 separate locations, each location has a separate isolator key switch built into the panel along with an external/internal selector switch for the sounders, auto dial on/off and an alarm reset switch.
Light Monitors
Light Monitors
Lighting programs can be monitored with the Weltech system. If the lighting fails to come on or go off when programmed the system will alarm, it can be set to run in unison with the house lighting program.
Radio Lone Worker
Radio Lone Worker Alarms
Weltech can supply either radio or mechanical lone worker alarms. The Portable receiver is easily clipped to workers clothing or belt, and is connected to the main alarm. If the Fob is 'tilted' or button is pushed this sends a signal to the receiver which triggers the alarm.
A radio transmitter is carried by the farm operator and if either tilted or activated will send a signal back to the main alarm panel and trigger a code 4 alarm at the central station where our trained operator will call all the call out numbers given by the customer. Single person working can now be covered in line with the work and safety regulations.
Mechanical Lone Worker Alarms
Mechanical Lone Worker Alarms
The mechanical lone worker is set once arriving at the location, it has a maximum time of 2 hours which if the unit has not been reset within the set time a code 4 will dial out to our monitoring station. Our trained operator will then call a set list of contact numbers until someone is reached. Single person working will be covered in line with the work and safety regulations.
Freezer Alarm
Freezer Alarm
The freezer alarm has a visual display of the temperature inside the freezer and with the unit you can program a minimum and maximum alarm, the sensor is located within the Freezer. The panel can then be connected into our MK3 alarm panel or your existing alarm system.
Digistat and Mains Failure
Digistat and Mains Failure
The digital temperature sensor has two separate alarm settings, one for high and one for low and a digital read out of the house temperature. The settings are manually set by the operator. The digistat is mounted outside the poultry house and a stainless steel sensor is positioned inside. Up to four sensors can be used depending upon the size of the house.
The digistat is powered via the mains fail relays within the control, the mains power can come from any source, normaly from the mains supply to the fan controller. The mains fail relay converts the 240 volts to a 24 volt DC supply which is the digistats supply and gives double protection on any failure.
Manual & Automatic Chicken, Poultry Weighing & Feed Monitoring System
BW-2050 Weighing System
Featuring the most up to date technology available, the BW-2050 Chicken Weighing Scale ensures accuracy, reliability and performance, with a completely new manual weighing system, and complete portability.
Weltech Mk3 Alarm System
The Mk3 alarm panel can monitor up to 12 separate locations, each location has a separate isolator key switch built into the panel along with an external/internal selector switch for the sounders, auto dial on/off and an alarm reset switch.
8016 Feed Control System
The 8016 Chicken Feed System can be programmed to batch from 1-10 seperate batches of differing amounts. Using the key panel the actual time can be set together with amounts to be batched and at what time.
Automatic Weighing Platforms
Weltech's Automatic Chicken Weighing Platforms are world renowned for their reliability and quality of manufacture. Up to 10 of these platforms can be used with the BW-8010 controller.